Loading Capacity Iso Pile Testing Machine High Strain Astm D4945 Standard

High Strain Pile Testing Equipment ASTM D4945 Standard For Loading Capacity

Application: Used for testing the pile loading capacity by dynamic method

Standard: ASTM D4945-00 “Standard Test Method for High Strain Dynamic Testing of Piles”

Parameters:

Technical features:

1. HPT used for determine the pile bearing capacity and pile integrity.
2. It can be used for pile driving monitoring and the cast-in-place pile testing.
3. Sampling frequency is optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz.
4. Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms
5. Before testing, the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state.
6. Automatically check the static strain deviation of the strain transducer during installation and adjust to zero before blow.
7. Test data exported through the external u-disk
8. During test every blow can be saved automatically
9. Storage capacity of more than ten thousands blows.
10. HPT data can save as *.X01 (used for PDA-W)
11. The main cable and connecting cable are compatible with the PDA.
12. Built-in lithium battery can be used more than 6 hours continuously.
13. PDAR program is for CASE method analysis.
14. RCAPWAP program is for match analysis automatically.

astm d4945 standard pile testing machine

high strain pile testing machine

pile load test equipment astm d4945

Loading Capacity Iso Pile Testing Machine High Strain Astm D4945 Standard Images